Dutch '59 Fleetside Longbed

[RockinKees]

Haha, That's right Jim!

I haven't sat still the last few weeks. I will show you in the next couple of posts...

I have got the airride in working order, but that's just on the ramp.
Didn't test it yet on the ground.
All the tests went well, it goes up and down, all four corners individually switched, two double needle gauges, compressor goes automatically on and off.

I'll show you some pics of the front first (excuse me, they are on their side again )
Pic #1 and #2, I welded in a 1/4" plate onto the subframe that was partly removed. I made the same plate for bolting the airbags to, so that I can unbolt them in the future when needed.
Pic #3 are the lower control arm plates. I removed the spring cups and welded in a flat 1/4" plate for mounting the bag.
Pic #4 is the complete assembly.