Panhard bar ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

panhead59 · 07-02-2017, 03:07 PM

Working on a 68 SWB. I'm removing the springs, panhard bar and shocks getting ready for a 4/6 drop. Is the bolt that mounts the panhard bar under frame threaded through the bushing? I have the nut off, and have the bolt spinning freely. A few smacks with a small sledge hammer and it's not budging. And it's not unscrewing like it's threaded. Just beat the %^&* out of it or what? Also having trouble loosening the bolts under the top of the springs. A 4 ft. bar wouldn't break em loose. Got em soaking in Kroil and will get a better impact gun I guess. I am gonna hate to get out the sawsall and then drill 'em out!!!! Suggestions?

07-02-2017, 03:07 PM	#1
panhead59 Registered User Join Date: Feb 2012 Location: Vinton, Va. Posts: 493	Panhard bar ? Working on a 68 SWB. I'm removing the springs, panhard bar and shocks getting ready for a 4/6 drop. Is the bolt that mounts the panhard bar under frame threaded through the bushing? I have the nut off, and have the bolt spinning freely. A few smacks with a small sledge hammer and it's not budging. And it's not unscrewing like it's threaded. Just beat the %^&* out of it or what? Also having trouble loosening the bolts under the top of the springs. A 4 ft. bar wouldn't break em loose. Got em soaking in Kroil and will get a better impact gun I guess. I am gonna hate to get out the sawsall and then drill 'em out!!!! Suggestions? Last edited by panhead59; 07-02-2017 at 06:45 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.