I Finally Z'd my frame!!

[loweredd]

I'm so happy I finally got it done! Now I can get down to finishing my "stock floor" body drop, and dropping in the LT1. Check out the pictures for those interested. MUCH easier than the crossmember drop, and for those of you, like me, that like a BIG wheel, or more than electrical tape for a sidewall, this is the ticket. A crossmember drop would not have cut the mustard for me, so I Z'd the frame. I moved the crossmember up 4". When the frame hits the ground now, the a-arms are about 2 1/2 inches off of the ground. I will be removing about 1 1/2 inches off of the lowest hanging portion of the frame so I will actually be sitting on the pinch weld of the cab.