Re: Original Style Steering Wheel on Ididit Column?
I've done two of these so I will chime in. The 54 wheel hub matches the ididit column perfectly. That's why I switched my 49 wheel to a 54. Plus my cab is a 54. The splines are also a perfect match, it slides right on! The horn cancel orientation is an obstacle you will need to overcome if you are running turn signals. You can't simply drill a new hole with your harbor freight drill press, its hardened steel so I had to pay a machine shop to do it. The more modern wheels have the hole at 1030 which the ididit cancel is designed for. The AD trucks have the hole at 1130 which will not cancel correctly according to ididit tech: I have no tested my gear since my truck is not finished.
The reason I did two wheels is I wasn't happy with my first attempt. It looked good but the hoop was not perfectly round. I used the original hoop and reduced it. This is not difficult but very time consuming. You will end up with a teard drop shaped hoop, cracks and gaping holes you will need to sculpt. No matter how much time you spend it will not be perfect. I bought a 71 Camaro for the next project (recently sold to buy a 68 Firebird vert) and the steering wheel hoop was the perfect size and shape. So I started over grafting a 71 Camaro hoop to a 54 center section. Much easier than reducing the original hoop! I'm very happy with my second attempt it's at paint right now and will match my trucks exterior color. Let me see if I can post a picture or two....
|