![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Aug 2012
Location: St. Croix River Valley, WI
Posts: 795
|
If you have a Spectra CU369 Radiator...
If you have this radiator (could have been purchased through Rockauto.com or many of the "chain" parts stores around) I could use your help.
This radiator has three fittings on the passenger side tank. Two of them are smaller fittings for a transmission cooler (you can see the little red plugs in my photo below) and one of them is a larger fitting that sticks out about 1" and has a plug in it. (Circled in RED) This larger fitting basically caps off an open hole into the radiator tank. Without this fitting, the radiator won't hold coolant. ![]() Does anybody know what size that fitting is? I removed the fitting from my radiator and I think it got tossed out when a friend was helping clean the garage last week. I contacted Rockauto AND spectra, but neither have any info as to what size this fitting is. It's an odd fitting in that it isn't pipe-thread, rather it seals with an o-ring at the base of the hex. ![]() If anyone just happens to have a junk version of this radiator, I NEED this fitting, or even the thread type and size would work so I can source another plug.
__________________
Meet "Old Roy": http://67-72chevytrucks.com/vboard/s...d.php?t=707801 |
![]() |
![]() |
Bookmarks |
|
|