Transmission swap- TH350 to 700R4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

snipescastle2 · 09-07-2017, 12:12 PM

I'm sure someone has already mentioned it, but if not, the T.V. (Throttle valve) cable needs the correct geometry to apply the correct pump pressure. If you are running a Holley carb like I am, you need the correct bracket that attaches to the throttle arm of the Carb. Not to mention, buying an adjustable TV cable makes setting the proper line pressure easy. You can purchase most everything through Summit/Jets or through Bow tie overdrives. If you don't have the proper tv pressure before driving, you can burn the Trans up before going anywhere.
Just wanted to make everyone aware of this.
Ben

09-07-2017, 12:12 PM	#20
snipescastle2 Registered User Join Date: Mar 2009 Location: WARRENSBURG,MISSOURI,64093 Posts: 1,518	Re: Transmission swap- TH350 to 700R4 I'm sure someone has already mentioned it, but if not, the T.V. (Throttle valve) cable needs the correct geometry to apply the correct pump pressure. If you are running a Holley carb like I am, you need the correct bracket that attaches to the throttle arm of the Carb. Not to mention, buying an adjustable TV cable makes setting the proper line pressure easy. You can purchase most everything through Summit/Jets or through Bow tie overdrives. If you don't have the proper tv pressure before driving, you can burn the Trans up before going anywhere. Just wanted to make everyone aware of this. Ben __________________ "Persistence is the twin sister of Excellence.one is a matter of quality,the other, a matter of time" “Serious Black” my 1971 Short Bed Fleetside Sold to an outstanding man in Lees Summit,Mo. “Gone, but by no means,Forgotten”



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.