Re: Where to get heater control cable clips
Tip for removal, so you won't need to find parts(unless one gets away from you). Take a small 90 degree o-ring tool or hook and stick the tip under the nut and work it off at 180 degree intervals, 90 if you have to..but just putting it behind one side and the other always works for me. You are just pushing the "fingers" that grab the stud a little at a time. Takes less than a minute, but watch out cause they'll fly off at the top if you're not careful. Another tip...use some tape or put your finger on top of the stud to keep the clip from disappearing into the atmosphere, don't ask how I know. If you do loose one they usually have kits in the ididit section at the auto parts stores if you can't find the parts listed above.
|