Aluminum Heads - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Luv68's · 04-18-2004, 12:44 AM

I am going to buy my first set of aluminum heads, so I would like some input from anyone who has done the same. It will be a street driven truck ( s-10 ), runs really good now but I want it to run a lot better. Which heads would you buy and what cc? It is not a daily driver so 93 octane gas is not a problem. I want over 400 hp. I already have roller rockers and a 750 double pumper holley on the motor now. I will be replacing my Performer Rpm intake with a Rpm Air Gap intake. Should I go ahead and do a roller cam set up to? Any help wopuld be appreciated. Don

04-18-2004, 12:44 AM	#1
Luv68's Registered User Join Date: Jan 2001 Location: Russellville, Tn and DeLand Fl. Posts: 533	Aluminum Heads I am going to buy my first set of aluminum heads, so I would like some input from anyone who has done the same. It will be a street driven truck ( s-10 ), runs really good now but I want it to run a lot better. Which heads would you buy and what cc? It is not a daily driver so 93 octane gas is not a problem. I want over 400 hp. I already have roller rockers and a 750 double pumper holley on the motor now. I will be replacing my Performer Rpm intake with a Rpm Air Gap intake. Should I go ahead and do a roller cam set up to? Any help wopuld be appreciated. Don



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.