Cab Mount Questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Mryan** · 10-26-2017, 04:16 PM

1971 K15 shortbed, I am changing the cab mounts and it looks like someone has been there before me. The drivers side had worn out bushings but the factory shim spacer type washers are present and I'll reuse them. The passenger side (which was sagging more than the left) did not have the nice spacers, instead just some mis aligned sleeves on the middle and rear mounts. Anyone know who supplies just the correct spacers? I would buy the whole mounts if I could fine the proper ones. I do not want to reuse the sleeves.

10-26-2017, 04:16 PM	#1
Mryan Active Member Join Date: May 2016 Location: Madison WI Posts: 146	Cab Mount Questions 1971 K15 shortbed, I am changing the cab mounts and it looks like someone has been there before me. The drivers side had worn out bushings but the factory shim spacer type washers are present and I'll reuse them. The passenger side (which was sagging more than the left) did not have the nice spacers, instead just some mis aligned sleeves on the middle and rear mounts. Anyone know who supplies just the correct spacers? I would buy the whole mounts if I could fine the proper ones. I do not want to reuse the sleeves.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.