1962 C60 Grain Truck Clutch

[davdue]

We have a '62 C60 grain truck. We have replaced the master cylinder and the clutch slave cylinder. Brakes work great but the clutch slave cylinder doesn't extend at all until the clutch about 1-2" from the floor. When it does move it only moves maybe 3/4" - 1". Not anywhere enough to release the clutch. We have bleed the line and no bubbles come out. It is a solid stream. The slave to clutch linkage free play is adjust about as tight as I would want it to be, maybe tighter. It is at most 1/4" anymore and the throw out bearing will be engaged. We have adjusted the rod from the clutch pedal to the master cylinder as far as it will go and stay threaded in the pedal. Any ideas. I purchased these parts from partsgeek.com. Nothing else has been changed.
Posted via Mobile Device