dual electric fans question(s)

[_Ogre]

us radiator has a pretty ingenious method for making fan shrouds
they have a press die for doing the formed corners of any flat plate
i believe they have the shroud laser cut, press the corners and then bend the edges to match
then they weld mount tabs on to the shroud

first time around the shroud they sent me had the tabs welded on the wrong edges
didn't work to well with top/bottom tabs on a stock radiator

one other thing on the ramjet 350 install: the main harness is 1'' in diameter
the main relay, fuel pump relay and 6 wires are on the end of this harness
off the top of my head they are: main power, ground, ignition, fuel pump, digital tach and analog tach
because of the relay sockets you can't feed the harness thru a grommet

the firewall mod behind the distributor has a removable back on it
i cut a half hole in the cover and base to accept the wiring harness
i used a grommet that is cut to go over the flex condiut