Another Edelbrock Carb Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

race-n-jason · 05-28-2002, 08:36 PM

I have a NEW Edelbrock 1411 Carb. (750cfm w/ Elec. choke) going on an Existing Edelbrock Performer intake. The intake has a "Spreadbore" design and the Carb looks to have a "Squarebore". Now I am aware that usually you have to use an adaptor in these instances, but I was just curious if Edelbrock might have compensated for this, or will I have to use the adaptor as well (even though both are edelbrock components)?

I know this might be a stupid question, but I would appreciate any feedback from someone who has dealt with this before.

Thanks in advance....

05-28-2002, 08:36 PM	#1
race-n-jason -Praise the Lowered- Join Date: Oct 2001 Location: Garland, Tx, USA Posts: 280	Another Edelbrock Carb Question I have a NEW Edelbrock 1411 Carb. (750cfm w/ Elec. choke) going on an Existing Edelbrock Performer intake. The intake has a "Spreadbore" design and the Carb looks to have a "Squarebore". Now I am aware that usually you have to use an adaptor in these instances, but I was just curious if Edelbrock might have compensated for this, or will I have to use the adaptor as well (even though both are edelbrock components)? I know this might be a stupid question, but I would appreciate any feedback from someone who has dealt with this before. Thanks in advance.... __________________ Race-N-Jason ('71 Chevy C-10 LWB 454/TH350) ('07 Dodge Ram 2500, 5.9 Cummins/6-speed Manual)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.