Pa. state inspection failed. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

custom10nut · 01-09-2018, 01:17 AM

You say your high beam indicator does work, and the turn signal inside doesn't work?
Do the turn signals work right with the headlights off?
Mine is doing the same thing, but I know what it is.
The grounds on your circuit board. Humidity creates corrosion and causes the break in continuity. Clean all the grounds, clean all the bulb sockets, and add a light coat of Dielectric Grease to the contacts.
That should fix your issue

01-09-2018, 01:17 AM	#26
custom10nut Registered User Join Date: Apr 2015 Location: East Tn (In the heart of the Smoky Mtns) Posts: 1,893	Re: Pa. state inspection failed. You say your high beam indicator does work, and the turn signal inside doesn't work? Do the turn signals work right with the headlights off? Mine is doing the same thing, but I know what it is. The grounds on your circuit board. Humidity creates corrosion and causes the break in continuity. Clean all the grounds, clean all the bulb sockets, and add a light coat of Dielectric Grease to the contacts. That should fix your issue



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.