|
03-08-2018, 03:33 PM
|
#11 |
|
Registered User
Join Date: Nov 2015
Location: portage wi
Posts: 506
|
Re: project 39
joedoh I used a piece of 3/8" rod and bent it to match the curve of the fender, tack welded it to my patch and then hammered the sheetmetal over the rod to get the rolled edge. Then cut the tacks off of the rod and finished the roll.
Last edited by CSHADES; 03-08-2018 at 07:25 PM. |
|
|
| Bookmarks |
|
|
Threaded Mode