![]() |
![]() |
#10 |
Senior Member
![]() Join Date: Sep 2017
Location: Bryan, Texas
Posts: 2,311
|
Re: Wife's 48
OK, this isn't all I got done today, but it shows that I am listening.
First I had a hole in the cowl. ![]() That patch to the right isn't mine, it came with the truck. So I used my new metal snips to fit a patch, first scribing the piece to be cut and then test fitting. I filed the hole until it fit. ![]() Then I welded it in place and used a die grinder with a cutting wheel to take off the excess weld. ![]() Yes, I still need to work some more on that old patch. It is right over a support brace and in a very difficult spot. I tried to hammer and dolly it up and got some of it to come up, but not enough. Back to my patch Then I grabbed a flap disc and here is what I have. ![]() I then took a hammer and dolly and started practicing on raising it where it was low and lowering where it was high, and it is pretty close. Oh, no pinholes. I used a light on the outside with me on the inside looking, and then vice versa. It is solid. |
![]() |
![]() |
Bookmarks |
|
|