How low is too low?

[kenr74]

In process of dropping my C20 and need some advice.

Did the flip in the back and removed 3 of 10 leafs. Looks good to me.

Did 3" spindles in front and it only dropped 2.25". Now the front sits about 1.5" higher than the rear. (measurements were inside my shop on cement floor)

Looking at the front though if I cut the coils to level it out I will just barely have the tire higher than the lip of the fender. Is that going to cause issues? I have some pretty big tires on it now and don't see changing them anytime soon.

I'm trying to decide between cutting the coils or adding a leaf back in to level it out.