Sway bar mounting holes on the lower control arm - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**cwcarpenter98** · 09-28-2018, 11:25 PM

So after spending several hours reading through a bunch of threads on here and a couple of other sites, I have not been able to find the dimensions for where to drill holes on the LCA to mount a factory 73-87 1 and 1/4 inch sway bar. I've noticed that most people use the LCAs from later model trucks when they do the disc brake swap, but I am still working with the 63 LCAs, so I don't have the holes. Does anyone know of or have a template on where to drill the holes in the LCA? Any sort of dimension to get me started would be greatly appreciated.

I'm really excited to get a sway bar on Frankentruck and carve some corners

09-28-2018, 11:25 PM	#1
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,493	Sway bar mounting holes on the lower control arm So after spending several hours reading through a bunch of threads on here and a couple of other sites, I have not been able to find the dimensions for where to drill holes on the LCA to mount a factory 73-87 1 and 1/4 inch sway bar. I've noticed that most people use the LCAs from later model trucks when they do the disc brake swap, but I am still working with the 63 LCAs, so I don't have the holes. Does anyone know of or have a template on where to drill the holes in the LCA? Any sort of dimension to get me started would be greatly appreciated. I'm really excited to get a sway bar on Frankentruck and carve some corners __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.