The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > All 4x4 Tech & Off Roading

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 10-01-2018, 02:12 PM   #1
jeffahart
Senior Member
 
jeffahart's Avatar
 
Join Date: May 2012
Location: Scottsdale, AZ
Posts: 1,906
NP205 to SM465 Adapter Crack - Not just an oil leak

I recently had my SM465 and NP205 rebuilt. I had a leak at the bottom of the adapter on the transmission side. I figured it was the gasket or one of the through bolts. I pulled the transfer Saturday and replaced the gasket. It's a full day project for me to pull everything off, including the hump, drop the transfer and stick the thing back in and reassemble everything. At the end of the day a bead of oil appeared in the same location. The gasket looked fully dry. What a pisser. I got under the truck this morning with an ultraviolet light. You don't need dye, you can see the oil with a real ultraviolet.

Attached picture, you can see the oil seeping from the crack. Ordered a new adapter.

Looks like I'll be pulling the 205 for the third time in an month.

Sucks, but glad I know it's cracked, I have freshly rebuilt gear boxes and a new drive shaft.



j
Attached Images
 
__________________
White K20
jeffahart is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:57 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com