Need some help with spacing of bedwood supports on a short bed stepside - The 1947 - Present Chevrolet & GMC Truck Message Board Network

freco · 10-13-2018, 07:26 PM

The picture shows my 1969 stepside short bed. The bedwood and most of the underlying support structure was already gone when I bought the truck... So, guessing where the steel bars supporting the bedwood should be placed is not that easy. I would greatly appreciate if someone would be so kind and help me measuring the distances between the holes in the bedwood on a short stepside bed. It's most important to get the distances from front to rear, but also side to side would be valuable. Maybe it's easiest to make a simple sketch and take a picture of it. Hope someone can help. Thanks in advance!

If you're interested in reading more about this restoration project there is a thread about it here: http://67-72chevytrucks.com/vboard/s...14#post8363714

10-13-2018, 07:26 PM	#1
freco Registered User Join Date: May 2017 Location: Gothenburg, Sweden Posts: 27	Need some help with spacing of bedwood supports on a short bed stepside The picture shows my 1969 stepside short bed. The bedwood and most of the underlying support structure was already gone when I bought the truck... So, guessing where the steel bars supporting the bedwood should be placed is not that easy. I would greatly appreciate if someone would be so kind and help me measuring the distances between the holes in the bedwood on a short stepside bed. It's most important to get the distances from front to rear, but also side to side would be valuable. Maybe it's easiest to make a simple sketch and take a picture of it. Hope someone can help. Thanks in advance! If you're interested in reading more about this restoration project there is a thread about it here: http://67-72chevytrucks.com/vboard/s...14#post8363714 Attached Images __________________ So many ideas. So little time.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.