High trucks are hard to work on... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SunSoaked · 12-03-2018, 12:57 PM

My K20 is no Bigfoot but it requires a step stool to work in the engine compartment. On the other hand, when I pulled the trans and T-case out I could sit cross-legged underneath it in the trans tunnel. Saturday I was installing my moon visor and couldn't reach the center of the front top of the cab (currently has a camper shell). So with one foot on the ladder and one placed carefully on the cowl I moved into position. Then I made a real bad decision when I put my knee on the windshield for balance. CRACK! It shattered from side to side and top to bottom. Well at least that $2.40/month for glass coverage will be worth the hassle. Live and learn.

12-03-2018, 12:57 PM	#1
SunSoaked Registered User Join Date: Dec 2011 Location: Yuma Arizona Posts: 1,525	High trucks are hard to work on... My K20 is no Bigfoot but it requires a step stool to work in the engine compartment. On the other hand, when I pulled the trans and T-case out I could sit cross-legged underneath it in the trans tunnel. Saturday I was installing my moon visor and couldn't reach the center of the front top of the cab (currently has a camper shell). So with one foot on the ladder and one placed carefully on the cowl I moved into position. Then I made a real bad decision when I put my knee on the windshield for balance. CRACK! It shattered from side to side and top to bottom. Well at least that $2.40/month for glass coverage will be worth the hassle. Live and learn.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.