Decisions on quality vs quantity - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**73kay** · 12-06-2018, 05:36 PM

Hey guys,

I'm looking for some advice from folks who have been in my position before. I got a few projects. A 76 c10 90% restored and a 69 c10 with no frame. I have a 78 K10 frame with a 454 4 speed just waiting for a body. Original plan was to modify the frame for the 69 and have that be my tow/stump puller while my cruiser would be the 76 c10.

Lately ive been tempted to swap frames with the squarebody and have a all in one truck and sell off the 69. I'm not opposed to fab work but I'm wondering if any of you guys consolidated some.of your projects to focus on really good truck and were you happy about it in the end? Thanks for the input.

12-06-2018, 05:36 PM	#1
73kay Senior Member Join Date: Jul 2014 Location: Indy, IN Posts: 637	Decisions on quality vs quantity Hey guys, I'm looking for some advice from folks who have been in my position before. I got a few projects. A 76 c10 90% restored and a 69 c10 with no frame. I have a 78 K10 frame with a 454 4 speed just waiting for a body. Original plan was to modify the frame for the 69 and have that be my tow/stump puller while my cruiser would be the 76 c10. Lately ive been tempted to swap frames with the squarebody and have a all in one truck and sell off the 69. I'm not opposed to fab work but I'm wondering if any of you guys consolidated some.of your projects to focus on really good truck and were you happy about it in the end? Thanks for the input. __________________ Andrew 1953 3100 292 T5 1985 K5 Blazer 350 700R4 208 Last edited by 73kay; 12-06-2018 at 06:23 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.