|
12-17-2018, 04:47 PM
|
#1 |
|
Registered User
Join Date: Jan 2014
Location: Ft Myers Florida
Posts: 571
|
Alternator wire
In this pic you'll notice that the wire I'm holding is disconnected from that clip going into the alternator. I've got 14.50 volts at the battery when running so its charging properly, so what is that wire for?
I traced the wire and it goes into the harness for the voltage regulator but it doesn't actually connect to the regulator, I'm guessing that this alternator is internally regulated so previous owner bypassed the regulator?
__________________
1968 C10 |
|
|
| Bookmarks |
|
|
Threaded Mode