![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#9 |
Registered User
Join Date: Nov 2010
Location: calgary alberta
Posts: 8,025
|
Re: Starting a 52 Chevy 3100 Project.
mopar,
if you have the original frame you could do a bolt in ifs and fab a rear suspension,or use a modified stock rear suspension with leafs, and then everything would fit. don't rule out building your own frame with a bolt in front ifs either. if you have fab skills and access to some straight beams to use for a jig, it could be relatively straight forward compared to a frame swap. trust me, frame swap is a lot of work, more so than a bolt in ifs on your old frame. lots of guys also swap in a front suspension from something else, then do a big c notch out back and then, if you look at it, the only stock chunk of frame left is the part the cab sits on.might as well start over. it might be straighter, lol. what do you have to start with, got a build thread or pics? not meant to offend anybody, there is a lot of work that has gone into some of these builds and there is some nice stuff sitting on S10 undercarriage. just saying from personal experience that a frame swap is not for the faint of heart so sometimes staying with the stock frame can get you driving faster and maybe keep the half built project off the buy and sell site. |
![]() |
![]() |
Bookmarks |
|
|