|
01-16-2019, 08:31 PM
|
#1 |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
67 Ramp got a tilt
I finally got around to installing the tilt column into the ramp today.
A friend let me barrow his shop to do the work. I got all the old steering column out and the newer tilt installed with 2 minor problems but hopefully tomorrow they will be covered. I forgot to order a turn signal cam for it and the column rubber boot for the fire wall. I got to order them. I took the old out and installed the tilt to get my measurements then I cut the DD to fit. Was simple enough. reinstalled the rag joint then slid the column in and tightened down the union and then put all the inside pieces back. 
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
| Bookmarks |
|
|
Threaded Mode