Requested Tubbing Pics

[SCOTI]

Some of you guys were asking about mini-tubbing & wanted to see some pics. As I stated in the other thread, mine is more than a 'mini-tub', but the same rule would apply just on a smaller scale. I also stepped my bed floor about 4".

I used 15x14" custom corvette ralleys w/9.75" of backspacing. Someone asked who I bought them from but I can't say for certain. I looked through my receipts & the only 'ralley wheel' receipt I could find was for another set of 15's I had made from a company called 'Ralley America' in March of 1992. I bought the 15x14's later & I'm pretty sure they came from Stockton wheel. I do know they had a service where they would send you a wheel w/the center pressed in so you could verify the offset would clear everything before permanently welding it in place.

For tires, I had MickeyThompson Sportsmans, 31x18.5x15. The truck was lowered about 6" and everything cleared. I shortened the stock panhard bar to center the rearend @ ride height.

Here are some of the pics . . ......