Cab Repair Order - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**69GMC2004** · 02-05-2019, 03:29 AM

I'm about to start doing the rust repair on my 69, and wondering what order would be best to replace rusted out panels. I need to replace:

Cab corners
Inner rockers
Outer rockers
Front and rear cab supports
Small sections of floor in front and near cab corners

I also have to do some minor repairs above the windshield and on the firewall as well, but those are small and straightforward. Cab is off of the truck and stripped, and will be bracing the cab before cutting out any panels. What order would you replace the listed panels? Any other tips or anything I'm missing before I start cutting?

02-05-2019, 03:29 AM	#1
69GMC2004 Active Member Join Date: Nov 2018 Location: SHERWOOD PARK, AB Posts: 113	Cab Repair Order I'm about to start doing the rust repair on my 69, and wondering what order would be best to replace rusted out panels. I need to replace: Cab corners Inner rockers Outer rockers Front and rear cab supports Small sections of floor in front and near cab corners I also have to do some minor repairs above the windshield and on the firewall as well, but those are small and straightforward. Cab is off of the truck and stripped, and will be bracing the cab before cutting out any panels. What order would you replace the listed panels? Any other tips or anything I'm missing before I start cutting?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.