What went on here? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**aerotruk63** · 02-23-2019, 07:57 AM

These holes are on both sides of the fleetside box at the front only. There's no staining on the outside or the inside to show a contour of some kind of bracket. There were remnants of a wooden stake that could possibly have been bolted through the 3/8" hole in the center of the four others.

This large hole was as I was told , an auxiliary fuel tank that was in the box. How could I cover this up?

Four of these type of holes from I believe tie down hooks. Looking for hooks to fill these.

Last but not least , on both sides , these clearance lights. Going to use some reflectors I have from another project to cover these up.

02-23-2019, 07:57 AM	#1
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	What went on here? These holes are on both sides of the fleetside box at the front only. There's no staining on the outside or the inside to show a contour of some kind of bracket. There were remnants of a wooden stake that could possibly have been bolted through the 3/8" hole in the center of the four others. This large hole was as I was told , an auxiliary fuel tank that was in the box. How could I cover this up? Four of these type of holes from I believe tie down hooks. Looking for hooks to fill these. Last but not least , on both sides , these clearance lights. Going to use some reflectors I have from another project to cover these up. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.