20 inch Wheels

[Afirehawk1]

looking for some advice.

i tried the Boyd Junkyard 20x9. Of course they don't fit right. i really like the look.

I have a current set of 15x8 with 215/70/15 for fitting. they fit good in the wheel openings but i want to upgrade to a 20 inch if possible. the backspace on the current rim is 4 inches.

the spacings are a 5x5.

The front hub length is about 2 1/16" without the grease cap. i am using the drop spindle set from Western Chassis. appears the hub length is too long. when i placed the rim on the front, the cap popped off and the rim would not fit flush on the rotor.

The rear hub bore diameter is ok but the edge of the rim extends to the outer edge of the bed fender. obviously it sticks too far out.

i was hoping someone had a setup already similar so i dont have to order a second set of rims then having to return them yet again.