Ho52 wheel bearing torque

[72c20customcamper]

I looked up the torque in my shop manual page 690 it says to torque the inner nut to 50-60 ft lbs . Then adjust nut backoff 1/8 to align tang on nut lock . Outer nut to 175 ft lbs. But it says this is for barrel roller bearings . Mine looks to have been replaced with tapered bearings. I can't see going that tight on a tapered bearing. Any advise as to proper torque or do I do it like the fronts . Tighten to drag then back off to lock in.