Best Attachment points to remove a 292?

[Bushman66]

OK, i spent about 40 minutes puzzling over where to attach the leveler bolts for the hoist to get the 292 out of the engine compartment. I plan to remove the grill and core support, and remove the bell housing with the engine and leave the transmission in the truck supported by a transmission jack.

I have one of those crank levelers but no idea where to attach the 4 points (or 2 as an option). I was thinking about removing the 4 corner head bolts, and attaching there using longer grade 8 bolts?

The accessory holes on the front passenger side of the head and the exhaust/intake bolt hole on the back drivers side is an option, but those are only 3/8" bolts. Seems borderline sketchy to lift with 2 bolts, with an engine this heavy.

Thoughts?