Closed knuckle-ball clean up advice needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Short 3/4 · 07-22-2019, 01:27 AM

I'm doing a total tear down/re build on a closed D44f (non HD) and of course it has the usual pitting and grooves on the ball. Was wondering best way to clean it up without going beyond the point of no return and making things worse. I'd like to only do this once, and not ruin it in the process.
I know they all leak and are obsolete junk, but I've been driving these since the seventies and happen to like them, so please don't try to talk me out of this.
As this is the first time I've torn one down this far, any advice would be very much appreciated
Thanks
Tom

07-22-2019, 01:27 AM	#1
Short 3/4 Registered User Join Date: Jan 2017 Location: Los Osos Ca Posts: 560	Closed knuckle-ball clean up advice needed I'm doing a total tear down/re build on a closed D44f (non HD) and of course it has the usual pitting and grooves on the ball. Was wondering best way to clean it up without going beyond the point of no return and making things worse. I'd like to only do this once, and not ruin it in the process. I know they all leak and are obsolete junk, but I've been driving these since the seventies and happen to like them, so please don't try to talk me out of this. As this is the first time I've torn one down this far, any advice would be very much appreciated Thanks Tom __________________ 65 short stepside K10 292-SM420-T221 8 lug closed D44 front NoSpin HO72 4.10 rear



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.