1969 C50 crew cab build - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sweetk30 · 07-29-2019, 08:46 PM

1ton down is setup for 2.75" wide stock leafs . aftermarket like lift kits go 2.5" you cant cut in the the housing for 3" wide unless you do a home brew u-bolt conversion as you will loose the 2 bolt holes for the spring plate .

the width for a dana 60 front is 32" center to center .
the 1ton rear for a 14ff is 40.5" center to center and 2.5" wide springs .

the rear can be worked around a bit but the front has the pass side spring mount cast in to the diff housing .

todays axles i would tend to start looking at ford f-450 and f-550 super duty stuff . there a lot bigger and bigger parts and also factory 19.5 rim size .

07-29-2019, 08:46 PM	#29
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	Re: 1969 C50 crew cab build 1ton down is setup for 2.75" wide stock leafs . aftermarket like lift kits go 2.5" you cant cut in the the housing for 3" wide unless you do a home brew u-bolt conversion as you will loose the 2 bolt holes for the spring plate . the width for a dana 60 front is 32" center to center . the 1ton rear for a 14ff is 40.5" center to center and 2.5" wide springs . the rear can be worked around a bit but the front has the pass side spring mount cast in to the diff housing . todays axles i would tend to start looking at ford f-450 and f-550 super duty stuff . there a lot bigger and bigger parts and also factory 19.5 rim size . __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great. Last edited by sweetk30; 07-30-2019 at 07:54 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.