![]() |
![]() |
#30 |
Registered User
Join Date: Nov 2010
Location: calgary alberta
Posts: 7,926
|
Re: AD wiring
signals,
lights ground to the rad support so make sure you have a ground wire from rad support to the frame and frame to battery. also,check the bulb socket ground because sometimes it looks good but there is a voltage drop across the socket to the light housing. I have also seen new bulbs with the little soldered terminal contacts not connected to the filaments properly, right outta the box that way. |
![]() |
![]() |
Bookmarks |
|
|