|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
08-22-2019, 01:31 PM
|
#1 |
|
Registered User
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,719
|
Steering box that might be viable for AD trucks with I beams
I saw mention of this on the HAMB this morning did a bit of searching and there may be possibilities with it for AD trucks that are running An I beam axle and could be a real problem solver for one with a dropped axle if you used a steering arm similar to what is used with a Ford I beam if it will clear the shock.
It's a Saginaw design box made by Borgeson that bolts to a plate on the frame rail. https://www.borgeson.com/xcart/produ...productid=1756 The sector shaft goes out below the frame rail and the pitman arm points up helping keep the drag link level. It's just food for thought and may solve the AD steering box VS exhaust issue with the right exhaust.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
|
|
| Bookmarks |
|
|
Threaded Mode