Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
09-02-2019, 08:47 PM | #3 |
Registered User
Join Date: Jan 2018
Location: Knoxville TN
Posts: 87
|
Re: 1953 project truck flywheel/clutch match?
This pic shows a 54 235 flywheel on the left and a 49 216 flywheel on the right.
Notice the difference in clutch plate contact surface and how far out the pressure plate bolt holes are on the 235. The 235 takes a 10" clutch assembly and the 216 takes a 9". ON the 235 flywheel the BB is 2 degrees ATDC (to the left of the UC mark). On the 216 it's 5 degrees BTDC ( to the right of the UC mark). Your 53 flywheel may resemble one or the other. Perhaps this is helpful. |
Bookmarks |
|
|