|
09-15-2019, 10:36 AM
|
#1 |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Front brake routing
What have you guy's done to hold the metal lines to rubber lines on these trucks when swapping from front drums to disc brakes. The truck has the metal clips on the backside of the A- frame and I need them on the front side to route the hard lines like factory. Can you buy the tabs and use a bolt to put it up front.
I'm worried about how the rubber brake line goes into the caliper and rubbing if installed from the backside. Any pictures are directions would be nice. 
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
| Bookmarks |
|
|
Threaded Mode