![]() |
![]() |
#11 |
Post Whore
![]() Join Date: Feb 2016
Location: Portland Oregon
Posts: 11,106
|
Re: Working Man's Burbon
Another miscellaneous project for today was to replace the fuel fill tube with one I got from Mel at Classic Bowtie. Compare the old one with the new one! (Photo #1) No wonder it wouldn't seal. After I got the old one removed a couple of pieces of pot metal fell out of it helping confirm my theory that a locking cap had at some point been removed with excessive force.
Pretty straightforward job. 3 screws and two hose clamps. I was unable to find a Suburban specific gasket for between the back side of the fender and the mounting flange on the filler. I did find that an early Nova/ Chevy II fuel fill gasket is the same size but has a different bolt pattern. (Photo #2 see the small silver dots on the gasket showing the Suburban bolt pattern) The third photo is the gasket done and the tube is sealed up so I can shove it into place and not get a bunch of crud in the tube/tank. Of course my locking cap doesn't fit this nice undamaged tube! The tabs are two wide to fit the filler tube slots. But I know how to take it apart and modify it to work. Sounds like a good rainy day project. I was also excited to start countersinking the replacement angle for the back edge of the plywood, but I found that the new piece I had made is not the right size. Uhhhggg!!!! The top or long side of the angle is too short. It appears that they measured the bottom inside dimension and then transferred that measure to the top outside dimension. Or in other word's the top piece is about 3//32" too narrow. Which isn't really a deal breaker, but it isn't what I paid for, and if I was only replacing the angle and not the wood also there would be a odd gap. So tomorrow it's back to the sheet metal shop. Yea!
__________________
Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. ![]() RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377 |
![]() |
![]() |
Bookmarks |
|
|