47-55.1 Rolling New Splash Panels to Running Board - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Driver_WT · 10-28-2019, 11:56 AM

I have moved the box up on my truck by about 2 inches (53 Chevy 3100 on S10 chassis). I would like to roll new, larger splash panels that go between the running boards and the box side. The rolling of the panels seems quite straight forward, but what do I do to the ends of the new splash panels that will go toward the cab on the front and the fender in the rear? Do I just cut a piece of metal and weld it on to the newly rolled splash panels? Or is there a way to get a rounded corner on the part that bends around the front and rear of new splash panels?

Hopefully this makes sense.

Wade

10-28-2019, 11:56 AM	#1
Driver_WT Registered User Join Date: Dec 2017 Location: River John, NS Posts: 448	Rolling New Splash Panels to Running Board I have moved the box up on my truck by about 2 inches (53 Chevy 3100 on S10 chassis). I would like to roll new, larger splash panels that go between the running boards and the box side. The rolling of the panels seems quite straight forward, but what do I do to the ends of the new splash panels that will go toward the cab on the front and the fender in the rear? Do I just cut a piece of metal and weld it on to the newly rolled splash panels? Or is there a way to get a rounded corner on the part that bends around the front and rear of new splash panels? Hopefully this makes sense. Wade __________________ 53 Chevy 3100, SBC 355, 700R4, S10 frame, Ford 8.8 rear with 4.11 gears, front disc & rear drum brakes



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.