![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#11 |
Senior Member
![]() Join Date: May 2007
Location: Doodah Kansas
Posts: 7,773
|
Re: 53 3100 - complete rebuild and upgrade . . . .
you have something going on with your running boards that I just noticed..
if you look at your before picture, the running board is tucked up against the rocker. this shouldnt be, there should be a 1-1.5" gap that is filled by a running board seal. in fact, if you compare how the running board attaches to the bottom of the rear fender but in the front has a 1-1.5 piece of the front fender hanging down, you can see what I mean. it looks like the whole bed/apron/running board got moved up to close that gap that usually has the running board seal in it. what I cant figure out, is you have a stock cab on a stock frame with stock running boards mounts, and the gap is still gone. so I am a little confused. in any event, if you lower the running boards that 1-1.5" for the seal, you will be closer to your 2" lowering goal right away. gorgeous work too!
__________________
the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393 |
![]() |
![]() |
Bookmarks |
|
|