01-12-2020, 08:51 PM | #5 |
Senior Member
Join Date: Jun 2016
Location: Beebe, AR
Posts: 462
|
Re: Hydraulic clutch swap
I went to a hydraulic clutch when I put the TR6060 in the truck (1986). I used a Wilwood master cylinder kit with a 3/4 bore cylinder. As was said previously, you will need to brace the cylinder against the firewall someway. I made two rods and had one end bolted to the master cylinder and one end to the pedal bracket itself.
Bubba |
Bookmarks |
|
|