66 GMC Long to Short LS Swap - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Duncan K · 01-17-2020, 11:24 PM

Welded up a bunch of holes inside the cab. The holes from the old gun rack were pretty nasty and had pulled the metal out. I made some sheet metal plugs using the core left over from an annular cutter. Drilled the holes out bigger with a step drill and it was a perfect fit.

Getting closer to having a rust free cab. Still have to fill and bunch of holes in the floor and firewall. Then tackle above the windshield and take the roof off to rust treat and sound deaden.Hoping to have it ready for blasting in a few weeks. Can't wait to see this cab in primer!

01-17-2020, 11:24 PM	#10
Duncan K Registered User Join Date: Oct 2017 Location: Calgary, Alberta Posts: 202	Re: 66 GMC Long to Short LS Swap Welded up a bunch of holes inside the cab. The holes from the old gun rack were pretty nasty and had pulled the metal out. I made some sheet metal plugs using the core left over from an annular cutter. Drilled the holes out bigger with a step drill and it was a perfect fit. Getting closer to having a rust free cab. Still have to fill and bunch of holes in the floor and firewall. Then tackle above the windshield and take the roof off to rust treat and sound deaden.Hoping to have it ready for blasting in a few weeks. Can't wait to see this cab in primer! __________________ 66 GMC 910 My Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=754257



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.