divorced np205 transfer case, pinion and u joint angles

[raylube]

My truck is a 64 k20. I have removed the eaton rear axle and swapped a 14 bolt, I have removed the front closed knuckle solid axle dana 44 for a open knuckle dana 44 and replaced the rockwell t221 for a divorced np205 from a international pickup mated to a 472 cad with turbo 400. Current angles are 8 deg pinion up , trans output 3 deg down, t case output 3 deg down.I also have installed springs and shackle flip on rear from 79 k20 and 6 inch lift springs from 72 k20. Other than the pinon at 8 deg up do I need to change any other angles, and if just the pinon should I drop it lower to compensate for axle wrap? Have the eaton axle sitting on frame to compensate for the weight of the bed that is buried in 3 feet of snow.