47-55.1 Cab too low at the rear, any ideas? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MARTINSR · 02-16-2020, 11:56 PM

Anyone have any ideas on why my cab is low in the rear?

Ok, what am I missing here. I bolted these shackles on the back of the cab. New bushings, it was the proper height. I trailered the thing to my new house (700 miles) and now the cab is a half inch lower in the rear and even hit the running board aprons denting the cab. Glad it wasn't painted! So I jacked the cab up where it belongs and there is a half inch gap to the shackle. Any ideas?

Is there suppose to be a spacer between the shackle and the cab? Is this shackle mounted too low on the frame or something? The holes where there, I didn't drill them.

Brian

02-16-2020, 11:56 PM	#1
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	Cab too low at the rear, any ideas? Anyone have any ideas on why my cab is low in the rear? Ok, what am I missing here. I bolted these shackles on the back of the cab. New bushings, it was the proper height. I trailered the thing to my new house (700 miles) and now the cab is a half inch lower in the rear and even hit the running board aprons denting the cab. Glad it wasn't painted! So I jacked the cab up where it belongs and there is a half inch gap to the shackle. Any ideas? Is there suppose to be a spacer between the shackle and the cab? Is this shackle mounted too low on the frame or something? The holes where there, I didn't drill them. Brian Attached Images __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.