![]() |
![]() |
#1 |
Slowly getting CRSS...
Join Date: Jul 2001
Location: Lutz, Florida
Posts: 656
|
Tuning question!
after many numerous attempts to try to tune my engine on my own I now turn to yall for help. Ive got the edelbrock 1410 atop a performer RPM intake. its an 850 cfm so i know its plenty for the motor. i know i have the timing right too. but the problem is when i get on the gas the truck will climb through the rpms smoothly until it gets into the high 3000's and up, itll start to loose power,idle back, cough, and just make a whole lotta heck till it shifts and drop the rpm. it only does it when i am gettin on the gas b/c it will only do it if the throttle is more than half way. Is it running too rich too lean are teh secondaries not doing their job? I dont know, im lost?
__________________
-Nic Lutz, Fl My Team Website The Heavy Chevy Website ------------------
There is No replacement for Displacement... "If everything seems under control, you're just not going fast enough." - Mario Andretti |
![]() |
![]() |
Bookmarks |
|
|