HP Tuners Tutorials - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Gregski** · 03-08-2020, 02:06 PM

Idle Tuning - Idle Airflow table

We should be getting the hang of reading these tables by now. You pretty much want to be in the green ie the operating temp zone. So if my engine likes to run at 194° F looking at the top of this table we would be somewhere between the 176° and 198° columns which is fine cause the values in those cells below are the same 43.7 in Gear and 42.1 in Park / Neutral.

Ok so in Park sitting in my driveway my engine fully warmed up should be flowing 42 pounds of air per hour, let's log some data and see what we actually are getting.

03-08-2020, 02:06 PM	#11
Gregski Post Whore Join Date: Aug 2014 Location: Sacramento, CA Posts: 10,869	Re: HP Tuners Tutorials - Idle Tuning Idle Tuning - Idle Airflow table We should be getting the hang of reading these tables by now. You pretty much want to be in the green ie the operating temp zone. So if my engine likes to run at 194° F looking at the top of this table we would be somewhere between the 176° and 198° columns which is fine cause the values in those cells below are the same 43.7 in Gear and 42.1 in Park / Neutral. Ok so in Park sitting in my driveway my engine fully warmed up should be flowing 42 pounds of air per hour, let's log some data and see what we actually are getting. Attached Images Last edited by Gregski; 03-08-2020 at 02:16 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.