Starting 1966 Factory Short Bed Build, Bagged, 383 Stroker and Muncie M20 4-Speed

[SCOTI]

Originally Posted by 88Stanger

I just measured and if the bags are at 5" height, that puts the top of the axle tube at the bottom of the frame approx. So this may not be bad, but only time will tell. At least now i know what i will need to do to get it where i want it.
I can adjust all for bags independently. I really wanted this ability, not that is matters much, but i like the idea.

Oh yeah, you definitely want to be able to adjust/isolate each corner independently.

Since you have lowering blocks, OE style T/A's & larger diameter wheels, you can always do a taller block if you need more psi in the bag for ride quality. The taller block adds more drop so you add more air psi to get things back to where you were w/a shorter block.

It's not recommended on smaller diameter wheels because of Scrub-Line concerns but you should be ok since you're not using 15's/stock steel wheels.