|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
04-17-2020, 06:35 PM
|
#1 |
|
Registered User
Join Date: May 2014
Location: Mission BC
Posts: 452
|
4L60E wiring question 72 K10 LQ4
After much thought and good comments from members I decided not to install the 700R4 and switch my transmission to a 4L60E..so I traded the transmission I had for a rebuilt 4L60E and have installed in my 72 K10 with a np205 transfer case.
Both are 27 spline. I repinned my own harness a few years back and removed the transmission control wires..so I have made a new harness for the trans and connected it as this per these drawings.. The question I have is where does the pink connector E (round plug) get it's power from? Pin 75 blue on ecm... Or do I have to add a splice to it to give it key-on power? I don't think I need the neutral switch(C2) as the truck already has a working one in the column, and is wired as such. (truck was running a TH350 for last few years) Thanks
__________________
1962 C10 Longbox LS 5.3 4L60E----Sold$$ 2014 Ram 4x4 3500 Laramie Diesel..Momma's truck 2015 Ram 4x4 1500 1997 Boxster. 1972 K10 Custom Deluxe LS 6.0 1950 GMC 3100 S10 & LS swapped |
|
|
| Bookmarks |
|
|
Threaded Mode