What torque converter - The 1947 - Present Chevrolet & GMC Truck Message Board Network

the idiocracy · 06-20-2020, 08:56 AM

I need some help selecting a torque converter. I am currently running an turbocharged Inline 6 with a Fitech EFI setup. I am changing from a Th350 to a 700R4. Not a racecar, just a hotrod cruiser that will do the occasional burnout.

Turbo is set to 10.5 psi and has a bit of lag...nothing to dramatic. occational

I was thinking of something in the 2200-2500 range for a stall, but I also want it to lock up at highway speed (3.73 rear and a 28" tire...cruising rpm will likely be right around that 2500 area).

Is 2500 stall too high?

06-20-2020, 08:56 AM	#1
the idiocracy Registered User Join Date: Jun 2016 Location: Davisburg, Michigan Posts: 54	What torque converter I need some help selecting a torque converter. I am currently running an turbocharged Inline 6 with a Fitech EFI setup. I am changing from a Th350 to a 700R4. Not a racecar, just a hotrod cruiser that will do the occasional burnout. Turbo is set to 10.5 psi and has a bit of lag...nothing to dramatic. occational I was thinking of something in the 2200-2500 range for a stall, but I also want it to lock up at highway speed (3.73 rear and a 28" tire...cruising rpm will likely be right around that 2500 area). Is 2500 stall too high?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.