Wiring 5.3 into factory bulk head. HELP! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

faun_cee · 07-29-2020, 10:06 PM

I used a 2001 tahoe for a donor vehicle and took everything needed.
My Problem is I don't understand how to integrate the wiring harness/fusebox from the tahoe into the bulkhead of the 69.

this is my first swap for any type of vehicle so all the terminology is still a bit confusing. ive been looking for a thread or video that dummy proofs it for me. im frustrated with this and i am at my last resort

07-29-2020, 10:06 PM	#1
faun_cee Registered User Join Date: Nov 2017 Location: San Jose, CA Posts: 32	Wiring 5.3 into factory bulk head. HELP! I used a 2001 tahoe for a donor vehicle and took everything needed. My Problem is I don't understand how to integrate the wiring harness/fusebox from the tahoe into the bulkhead of the 69. this is my first swap for any type of vehicle so all the terminology is still a bit confusing. ive been looking for a thread or video that dummy proofs it for me. im frustrated with this and i am at my last resort



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.