Is This the Stock Shifter Linkage - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**pjmoreland** · 08-20-2020, 03:06 AM

The shifter was super sloppy in a truck I bought recently. The first problem was that the rod was installed upside down (the right-angle end was attached to the column). The second thing I noticed was that the linkage does not look the same as the setup in my old '72, including the hardware that attaches the rod to the steering column. Is this what shifter linkages and hardware looked like for the 1968 model year?

08-20-2020, 03:06 AM	#1
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 6,017	Is This the Stock Shifter Linkage The shifter was super sloppy in a truck I bought recently. The first problem was that the rod was installed upside down (the right-angle end was attached to the column). The second thing I noticed was that the linkage does not look the same as the setup in my old '72, including the hardware that attaches the rod to the steering column. Is this what shifter linkages and hardware looked like for the 1968 model year? Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.